Green Touch Chip Cooperative Brand Honors Pro-choose MOECEN Earbuds X1 True Wireless Bluetooth Headset
Honor Pro-choice is an e-commerce platform of Honor, which is mainly engaged in various smart home products and aims to create an AIoT ecological chain belonging to Honor. Recently, MOECEN’s Earbuds X1 true wireless Bluetooth headset was selected into the Honor Pro-choice Eco-Chain and went on sale through Honor’s e-commerce platform. It has received a lot of attention. Today we will take a look at it.
According to my observation on the official website of Honor Proxuan, MOECEN’s Earbuds X1 is the platform’s first third-party TWS headset product, which just fills the gap in the entry-level product of Honor headset in terms of price.
In terms of hardware configuration, Earbuds X1 supports Bluetooth V5.0, supports simultaneous transmission of both ears, and the official data game audio delay is as low as 130ms; the headset has a customized 7mm composite diaphragm moving coil unit that supports SBC and AAC audio encoding; the headset supports dual microphone calls Noise reduction function, touch support, IPX4 waterproof. The headset battery has a capacity of 55mAh, the charging box uses a Type-C charging interface, and the battery capacity is 500mAh. The overall configuration has almost no shortcomings in products at the same price. Let’s take a detailed disassembly to see which components are used in Earbuds X1~
I have previously disassembled Honor FlyPods 3 true wireless active noise reduction headphones , Honor FlyPods TWS true wireless Bluetooth headset , Honor FlyPods youth version TWS Bluetooth headset , Honor Xinqing wired headset .
1. Unpacking MOECEN Earbuds X1
The packaging box is a small white square box, and the upper left corner of the front is the brand logo selected by Honor; the rendering shows the inner and outer sides of the earphone, with a white body and an in-ear design; the name of the earphone, MOECEN True Wireless Bluetooth Earbuds X1; Features, true wireless, dual-mic call noise reduction, 24 hours long battery life, pure sound quality.
The back of the box is a detailed introduction of product features and hardware information. Product model CE79, overall size 60.3*43.2*28mm, net weight 47.1g; charging box power input 5V?410mA, output 5V?50mA, charging box battery 500mAh, headset battery 55mAh.
The manufacturer is Jiahe Intelligent Technology Co., Ltd., and Shengshi Technology is a wholly-owned subsidiary of Jiahe Intelligent.
The contents of the box, earphones and charging box are stored separately, the charging short cable and the included silicone earplugs are individually packaged, as well as a quick start guide and a cleaning stick.
Let's first look at this more "going heart" gift, two cleaning cotton swabs.
The function of the cleaning swab is to clean the dirt on the metal contacts.
The two ends of the cotton swab are very sharp and slightly moist. Use it as soon as possible after disassembly.
The headset comes with two extra pairs of silicone earplugs, and the headset is a medium size.
The charging cable is a USB-A to USB Type-C interface with a short length.
There are three reminders for the seal on the charging box: 1. The earphone must be put into the charging box to activate for the first time; 2. Do not open and close the charging box cover frequently in daily use, for the sake of service life; 3. It is recommended to turn on the Bluetooth of the mobile phone for daily use. Take out the headset to ensure the success rate of pairing.
The surface of the charging box is polished, and the top and bottom are two flat surfaces, with a smooth transition at the edge, and there is a charging indicator on the front.
The hinge on the back of the charging box is displayed.
The Type-C charging port is located at the bottom of the charging box, and the C port can be blind plugged in front and back. It is easy to use, and it is very popular now. The charging case shell is made of polypropylene.
I love audio network uses ChargerLAB POWER-Z KM001C portable power tester to carry out wired charging test on Sound's Earbuds X1, the power is about 2.1W.
The headset is placed vertically in the charging box.
The gold-plated charging contacts at the bottom of the charging cockpit.
MOECEN Earbuds X1 true wireless Bluetooth headset and charging case.
The total weight of the headset + charging box: 47.1g, consistent with the official publicity.
Single weight of charging box: 38.4g.
The left and right earphones weigh together: 8.8g, which is lighter.
2. The MOECEN Earbuds X1 charging box has been disassembled
after the previous unboxing. We have got a preliminary impression of the design of the Sound Earbuds X1 true wireless Bluetooth headset. The earbuds and the charging box are white, with openings and decorative patterns. Are very few. Next, we will enter the dismantling link. The first to be dismantled is the charging box part and take a look at its power management system.
Pry open the charging cockpit, the physical structure of the buckle connection.
The indicator light on the front of the charging box has a hole, and there is a light guide on the inside.
The internal structure of the charging box, the main board is located at the bottom of the charging box, and the battery is in the middle of the earphone tube.
There is a cushioning foam on the back of the battery.
The main board of the charging box is located at the bottom, the power input interface is directly welded to the main board, and the main board is screwed to the shell.
The FPC where the indicator is located is connected to the motherboard through a connector.
Disconnect the FPC, separate the main board and the shell.
Adhesive Hall/Indicator cable inside the charging cockpit.
Remove the FPC, there are three magnets on the inner shell of the charging cockpit, one of which is round for absorbing the cover of the charging case, and two square for absorbing and fixing the earphones.
There are indicator lights and Hall elements on the FPC.
There are no components on the back of the FPC.
Two LED indicators are used to indicate the charging status of the headset and the charging box, and the outer ring is wrapped with foam to prevent light leakage.
Screen printing 8NMA Hall element. The magnetic field changes when the charging box cover is opened and closed will be sensed by the Hall element, and the MCU and earphone will be notified to pair or disconnect with the connected device.
The soft pack battery is fixed on the main board by double-sided adhesive and connected to the main board by wires.
The main circuits are concentrated on the bottom side of the motherboard, let's look at them one by one.
The charging box uses the Type-C interface to input power. The input current is stepped down by the left circuit to charge the built-in battery, and the right is the charging box MCU and related circuits.
LPS Microsource Semiconductor LP7801D ultra-low power charge/discharge single chip, integrated linear charge management module, low-power synchronous boost discharge management module, when the 5V is normally open, the entire earphone compartment <10uA standby current (including earphones, protection Board); It is the first all-in-one chip in China that has passed IEC62368 safety certification.
LP7801D adopts ESOP-8 package, built-in OVP, input withstand voltage 28V, omit input over-voltage protection components, standby current 1uA.
Micro source LP7801D details.
Before the step-down current enters the battery, it also passes through a protection circuit composed of a battery protection board, on which there is an integrated lithium battery protection IC and a thermistor that detects the battery temperature.
Battery model M 121829, rated voltage 3.7V, rated capacity 500mAh/1.85Wh. The production date is May 23, 2020.
Two 3904 small signal transistors.
LPS Microsource LP3993-30B3F, 200mA high withstand voltage low power consumption linear regulator.
Micro source LP3993-30B3F detailed information.
The screen-printed 23AS MOS tube controls the charging of the earphones. The earphone charging contacts are protected by TVS to prevent electrostatic breakdown.
A non-standard single-chip microcomputer is used for charging box functions such as battery display, headset charging status, headset charging current detection, and the two 1Ω resistors on the left are used to detect headset charging status.
Display on the back of the charging box.
Gold-plated thimble to charge the earphones.
3. Disassembly of MOECEN Earbuds X1 headset
Let's disassemble the earphone part. The outer shell of Earbuds X1 is a flat surface that supports touch. The overall appearance is not as AirPods Pro as in the rendering; the earbud handle design is convenient for adding dual-mic call noise reduction function.
There is a pressure relief hole on the outer shell of the earphone, which is also used for noise reduction microphone to pick up ambient noise; there is a hidden indicator light next to it, which can be observed during the day.
There is a call microphone at the bottom of the headset to pick up human voices and charging contacts.
The fine dust-proof net at the sound hole can prevent foreign matter from entering the earphone.
Disassemble the earphones along the inner and outer moulding lines of the earphones, the classic strip motherboard + soft pack battery + speaker internal structure.
The internal structure of the outer cover, the outer ring is a Bluetooth antenna, which is connected to the metal shrapnel on the motherboard through two adjacent contacts at the headphone handle; the top contact of the headphone handle corresponds to the FPC in the touch sensing area, which is also through the Metal shrapnel power supply.
Airtight foam for microphone opening and indicator position.
In the internal structure of the sound cavity, the speaker unit is connected to the FPC through a wire, the FPC is also connected to the battery, and finally to the motherboard. There is a foam on the inside of the housing to support the FPC and battery, and a bar magnet at the bottom to absorb the charging case.
The speaker unit close-up.
The size of the speaker unit is about 7mm, consistent with the official publicity.
Remove the soft pack battery from the headset.
The fixed position of the magnet that attracts the charging case.
The size comparison of the soft pack battery and a dollar coin.
Soft pack battery information, size 1254, rated voltage 3.7V, rated capacity 55mAh/0.204Wh.
The outside of the main board is sealed with a lot of glue.
A close-up of the bottom charging contacts and call microphone position.
Remove the fixed plastic part.
Close-up of plastic parts.
Remove the sealant and take out the motherboard circuit of the headset.
The size comparison of the motherboard circuit and a dollar coin.
Inside the motherboard is the circuit related to the Bluetooth chip.
The external circuit of the motherboard is displayed.
The charging contacts and the call microphone are connected to the motherboard through the FPC, and there is a dust-proof net with the microphone pickup hole in the middle of the charging contacts.
Laser carving R017 A51D's MEMS silicon microphone is mainly used to pick up human voices during calls.
The external circuit of the motherboard is displayed.
The metal shrapnel connecting the touch FPC and the Bluetooth antenna.
Close-up of two LED indicators, and the microphone opening on the right.
Natlinear Nanlin XT4052, a linear charging IC with a maximum output current of 300mA, can charge the built-in lithium battery of the headset.
Natlinear Nanlin XT4052 details.
The touch IC of the silk screen 8233LF is used to detect touch operations.
Silkscreen 0JA3 is a DFN1×1 lithium battery protection IC from Suzhou Saixin Electronic Technology. This is an ultra-low static power lithium battery protection IC. It adopts the smallest packaging method DFN1X1 in the industry, which can save the space of TWS headset battery protection circuit. More functional design gives way.
The back of the motherboard is mainly Bluetooth audio SoC and related circuits.
The Bluetooth master chip of Sound's Earbuds X1 uses Hengxuan BES2300. BES2300 is a fully integrated adaptive active noise reduction solution that supports Bluetooth 5.0, IBRT low-frequency forwarding technology and dual-mode Bluetooth 4.2. It also supports the third-generation TWS full wireless stereo technology, dual microphones, etc., using 28nm HKMG CMOS process, BGA Package.
BES2300 also supports external heart rate sensors, acceleration sensors and other external sensor devices and eMMC flash memory, which can achieve the purpose of playing music on external storage devices. BES2300 can output sound to headphones and home audio, and can also record from an external microphone.
According to the dismantling of my love audio network, Huawei, OPPO, Xiaomi, Meizu, JBL, Wanmo and many other well-known audio brand products have built-in Hengxuan solutions .
The MEMS silicon microphone of the laser carving R017 A510 is mainly used to pick up the ambient noise and assist in the noise reduction of the call.
Disassemble the family portrait.
I love audio network summary
MOECEN Earbuds X1 true wireless bluetooth earphones, earbuds and charging box have a simple design, few openings and small size. There are two planes on the top and bottom of the charging box, and the outer cover of the earphone is also a plane, which is somewhat different from the official renderings that are too round, causing many people to misunderstand.
Earbuds X1 charging box adopts Type-C interface input power supply, and contains LPS Microsource Semiconductor LP7801D single-chip charging and discharging solution, which can step down the input current to charge the built-in battery, and boost the battery output current to earphones and other components Power supply; battery capacity 500mAh; there is a Hall element in the charging box to realize the function of opening and connecting.
In terms of earphones, there are only two microphones on the housing of the Earbuds X1 with openings, and the indicator lights are designed to be hidden. The earphone cavity is slightly larger, the earphone handle is relatively short, and the overall appearance is still very high; the interior adopts a bar shape Motherboard, in order to realize the noise reduction function of dual microphone calls; the Bluetooth main control chip is Hengxuan BES2300, which supports Bluetooth 5.0, does not distinguish between the main and auxiliary ears; the headset uses the FPC + thimble touch solution, and the Bluetooth antenna is also a patch type; inside the headset The soft pack battery has a capacity of 55mAh. There are Nanlin XT4052 linear charging IC and Saixin Micro DFN1×1 lithium battery protection IC on the motherboard.
Overall, the Earbuds X1 true wireless Bluetooth headset launched by MOECEN this time is a good entry-level TWS headset product with reasonable design and regular workmanship. A little regret is the lack of in-ear detection function, but the volume is Battery life is also a major advantage of its products at the same price.
The ability of MOECEN Earbuds X1 to enter the supply chain of Honor's selection is a win-win choice for both parties, because Honor currently has no layout in entry-level TWS products. On the other hand, Shengshi’s R&D and products have also gained well-known brands. Endorsement. If in the future Honor Pro Choice and Honor mobile phones can be further opened up in terms of software functions, AIoT products including TWS headsets will be even better for consumers' experience.
right 2023. Chinaic Technology Co. ,Ltd. All Rights Reserved 粵ICP備13001812號
